17th week

AITOR DE LA FUENTE , DANIEL PUENTE, GAIZKA SEGOVIA

This week has been one of the hardest this quarter, because we have had two exams for some people. some people had to do one exam and other people another exam of recuperation. Apart from that with Julen we have keen learning how to make surfaces in catia , and the next week we have and exam about that. 

With Richard we have made an english oral exam in pairs, the exam was about a normal situation in our lives between two people, the aim of the exam was to have a normal and natural conversation between us. 

With Nagore and Gaizka we have kept doing the proyect, making new pieces. When we finish with the pieces we also have to make the assembly. Also when we finish with that we shlould start with the sketch of the piece that we will get from the mould we hara desingning. 

On friday we before the exam we have an small presentation from the people of 2CMM, which theme was about the proyect they have already finished. Before that we did the exam with Gaizka and the we had Empresa with Iranzu.

15th Week

Aitor de la Fuente, Daniel Puente, Gaizka Segovia

This week we start assembling the last pieces of the die. Dani, Gaizka and me we were drawing the alst pieces of the die, we have to make a cutting piece with the for that we want. For that we try to draw in the place that it have to be in the die, because if we insert the componet it can bve in other place, so we have to place it with constrains. 

On Thuesday Dani has some problems with CATIA because of a mistake he didnt save all the work that he have done. We try to do the same work taht we make on monday and wwe could help him.

In thursday we start making all the information that we have to give of our die of fundition, we have to choose the material, how we are going to introduce in the steel, the time it have to take to get cold the piece, the tipe of the sand, the tipe of fundition. Because depending on the fundition that we want to use it can take some properties or others.

We choose the day to the examan of cutting, that its going to be the 14th of february.

We have check the procces of the pieces that arre doing the students of 2cmm, some pieces are finished but other because of the material are not finished, the base is going to be the next piece to machine and matriz is going to be the last one. With the base we are going to be with them to see the procces of machinin and to help them with all that we can do.

16th week

DANIEL PUENTE, AITOR DE LA FUENTE, GAIZKA SEGOVIA

(we are having problems to introduce images, it give us error and does not let us save, that is why in this text we have not introduced images)

We have started the week with the introduction of the last challenge that we will do this year.

The new challenge is that in class we have an injection mold, and we have to design a piece that serves to put under the die that we are going to manufacture, so when the die is in the storage it is not

in direct conact with the shelving.
What we have to do is draw in CATIA the pieces that form the mold in 3D as they are, unless the piece that shapes the product we want to get. Then we will have to make the drawings of the pieces, because the real objective of this challenge is make the drawings.

The second day of the week was the day that we delivered the notebook with all the information of the previous challenge that we made, because that day was de deadline for delivery.
Also that day some people of the class delivered the the recovery project that Gaizka sent us to recover a section of the first challenge, and we have also made the delivery of the base assembly to the die and the way to tie the press.

For this new, and last challenge, Iranzu gave us some work for the company section.
Thework that we have to do is make a DAFO, and make a questionnaire to an other group of class.

On Friday, the las two hours of class of the week, we have made an exam with Nagore.
The exam was about foundry.

14nd week

Daniel Puente, Aitor de la Fuente and Gaizka Segovia

This week we have learned how we have to do the planes of our proyect with Julen. We also have and interview with and expert in die bases, who has adviced us how to do it. Also he used a programe to analize the base, like this we know which are the defects we have to correct.









We have had two speeches, one about thing we can study in the future, for example go to the university or do another high degree. The other speech was about the most claimed job nowadays we can work with our high degree.

To have an enjoyable class we have been doing some kahoots in groups about melting.



In Company we have delivered templates on different methods of payment, like, a promissory note, the check or bill of exchange and also the receipt.

But the most important thing we have done is to continue with our proyect, doing changes in it with the recomendations of the expert. And the people who have to make up one course, we have kept with our own proyect, which consist in finishing another die.

On friday we assembled the die with the finished base. Also we have strated to do some virtual checks to know the resistances and see where we hace to put some support.

13 nd week

DANIEL PUENTE, AITOR DE LA FUENTE AND GAIZKA SEGOVIA

We started the week having some theorical speakings, because we have started the new challenge few days ago. The first speaking was about the parameters of the challenge, to make sure we all knew what we have to do.

After that we had a second speaking about technical information about foundry.

Nagore told us about the different method of foundry that are used and some features about them, and after that we made some execises about foundry, to make sure that we understood the theory and to start reminding some things. 

At English classes some people made a presentation about what they do on their DUAL, and the people that do not have DUAL made presentation about some topics that Ricardo told us.

The second day we started drawing in catia the base of the die with the information that Nagore  gave us.

Each person of the group did his sketch of the base and explain it to the rest of the group.

After that we choose the better option for the challenge and we made some changes to improve the design.

We also have an speaking from a person that came from a company, he speaked us of what is his job on his company.

On thursday we went to a foundry of Elorrio, Betsaide S.A.L and we made guided tour through all the different phases and they explained what they were doing in each one.

12th week

Aitor de la Fuente, Daniel Puente, Gaizka Segovia

The last week we started with the presentation of our new challenge, in this challenge we have to design a base of fundition for our die.

For this we have some PDF to read where we have the information. There is the iformation of how is going to be the minimum distance of our bases walls, the treatments that we can use on it, treatment for the hardness our it, because we are going to hit it with 80 tones, the hight of the pores when we paint it, the percentage of carbono that we have to use, minumum 1,76% and maximum 6.67%. The angle of the ramps, minimun angle sould be 30º, because the scrap that we dont need can evacuate better.

For our base we are doing an individual sketch where we  draw in 3D how we think that can be the better way of the bases design. There we try to draw with the minimum material possible and taking into account our die. Because if we make the evacuation ramps in the grong place we can have problems when the die is working.

With Julen we have learn how can we make a oiece in CATIA with angles, where we can make a solid with angle but we dont need to use the operations of cutting for it.

The next week Jon Asenjo is going to come for solve our questions of the base and to explain us how does this bases work in fundutions. Next week we are going to evaluate the sketches or the group and we are going to choose one for our die